ID Your Grapple Loader

You can locate the serial number in two places:

ID Your Grapple Loader

Tag on the Body

ID Your Grapple Loader

Stamped on the Head Assembly

When you need to ID your loader, there are two simple ways to accomplish this when using a Petersen loader. You are going to want to check either the ‘tag on the body’ or you will find it ‘stamped on the head assembly.’

When you are locating the tag on the body, it should stand out just as the image above shows it. There will be the model loader’s number and the serial number.

However, if you are looking for the stamped head assembly, it reads as follows: Model, Serial Number. Notice how on the image above it says TL 3 followed by a stream of numbers? That shows us that the loader on the right is the Trash Truck model TL-3

If you have trouble ID’ing your loader and need assistance, feel free to give us a call at (863) 676-1493 or e-mail us at [email protected]. We would be happy to help you with any problem you may have.

  Contact Us
close slider
Contact Us
First
Last