863.215.7188

Model TT-2 Garbage Trailer

Model TT-2 – Trash Dump Trailer

Our standard garbage trailer is heavy duty! The trailer includes 3″ pintle eye, jack stand, quick couplers, and 15,000 lb capacity drawbar. Designed for use with Petersen models RL-3 and RL-2.

  • Available with single or dual axle
  • Electric brakes are standard
  • Body lights are inset or flush mounted
  • Single sheet 3/16″ floor
  • 10 gauge sides, headboard, and doors
  • Side stakes 3″ x 4″ formed channel
  • 4″ cross sills on 12″ centers


Download Brochure


Download Specifications

Specifications
Specifications

BODY FLOOR
10 gauge steel continuously welded to the floor. The top rail is 3″ x 4″ formed channel.

CROSS SILLS
10 gauge steel continuously welded to the floor.

HEADBOARD
3″ x 4″ x 10 gauge formed channel on 24″ centers. 1/4″ steel plate formed rear comer posts.

BODY SIDES
Top and bottom positive locks. Three hinges per door with two 5/8″ thick straps.

SIDE POSTS
10 gauge steel continuously welded to the floor. The top rail is 3″ x 4″ formed channel.

BARN DOORS
10 gauge steel continuously welded to the floor.

BODY HOIST
12-ton dual hydraulic cylinder hoist.

FRAME
2″ x 8″ x 1/4″ steel tubing with 6 cross members. Long members are one welded piece from pintle eye to hinge.

SINGLE AXLE
15,000 lb. capacity with dual wheels and tires. Electric brakes are standard. (also available with tandem axle)

DRAWBAR
Vertical load capacity of 15,000 Ibs. and 3″ pintle eye.

BODY LIGHTS
Meets federal lighting standards. Mud flaps installed behind rear wheels.

PAINT
High-grade primer and enamel finish.

All Petersen trailers include manual jack stand mounted on the tongue of the trailer with sufficient capacity for disconnecting loaded trailer. One control valve is included for operation of a hoist. Additional control valve will be included if the optional hydraulic jack stand is used. Quick couplers on hydraulic lines and electrical hookup, including lights and brakes.