TT2 Trash Dump Trailer

TT2 Trash Dump Trailer

Our Standard Trailer is Heavy Duty!

Trailer includes 3″ pintle eye, jack stand, quick couplers, and 15,000 lb capacity draw bar. Designed for use with Petersen models RL3 and RL2.

  • Available with single or dual axle
  • Electric brakes are standard
  • Body lights are inset or flush mounted
  • Single sheet 3/16″ floor
  • 10 gauge sides, headboard, and doors
  • Side stakes 3″ x 4″ formed channel
  • 4″ cross sills on 12″ centers
TT2 Trash Dump Trailer Specs

BODY FLOOR
10 gauge steel continuously welded to the floor. Top rail is 3″ x 4″ formed channel.

CROSS SILLS
10 gauge steel continuously welded to the floor.

HEADBOARD
3″ x 4″ x 10 gauge formed channel on 24″ centers. 1/4″ steel plate formed rear comer posts.

BODY SIDES
Top and bottom positive locks. Three hinges per door with two 5/8″ thick straps.

SIDE POSTS
10 gauge steel continuously welded to the floor. Top rail is 3″ x 4″ formed channel.

BARN DOORS
10 gauge steel continuously welded to the floor.

BODY HOIST
12 ton dual hydraulic cylinder hoist.

FRAME
2″ x 8″ x 1/4″ steel tubing with 6 cross members. Long members are one welded piece from pintle eye to hinge.

SINGLE AXLE
15,000 lb. capacity with dual wheels and tires. Electric brakes are standard. (also available with tandem axle)

DRAW BAR
Vertical load capacity of 15,000 Ibs. and 3″ pintle eye.

BODY LIGHTS
Meets federal lighting standards. Mud flaps installed behind rear wheels.

PAINT
High grade primer and enamel finish.

All Petersen trailers include manual jack stand mounted on tongue of trailer with sufficient capacity for disconnecting loaded trailer. One control valve is included for operation of hoist. Additional control valve will be included if optional hydraulic jack stand is used. Quick couplers on hydraulic lines and electrical hookup, including lights and brakes.

  Get a Quote
close slider

Fields Marked with an * are required