MHX HARDOX® Body

The Lightest & Toughest On The Market

When quarrying equipment, vehicle shredders, and mining excavators need maximum durability, they use Hardox®. Our partnership with SSAB brings you Hardox® bodies – the toughest, lightest, and best looking bodies in the industry.

  • Sides, floor, doors, & top rails fabricated from Hardox® 450 wear plates
  • No side posts or floor cross sills
  • Reduces weight and allows steel to flex and absorb impacts
  • Smooth sides are optimal for body wraps for advertising

The MHX body is a large capacity Hardox® trailer. When quarrying equipment, vehicle shredders, and mining excavators need maximum durability, they use Hardox®. Our partnership with SSAB brings you Hardox® bodies – the toughest, lightest, and best looking bodies in the industry.

  • Sides, floor, doors, & top rails fabricated from Hardox® 450 wear plates
  • No side posts or floor cross sills
  • Reduces weight and allows steel to flex and absorb impacts
  • Smooth sides are optimal for body wraps for advertising
HDX HARDOX® Body specs
Model Length (ft.) Volume (cu. Yd.) Side Ht. (ft)
2236 MHX22 ft.36 cu. yd.6 ft.
2240 MHX22 ft.40 cu. yd.7 ft.
2245 MHX22 ft.45 cu. yd.7.5 ft.
2440 MHX24 ft.40 cu. yd.6 ft.
2445 MHX24 ft.45 cu. yd.7 ft.
2450 MHX24 ft.50 cu. yd.7.5 ft.

BODY FLOOR
Single 3/16″ Hardox® HX450 steel place

CROSS SILLS
None

LONG SILLS
10" structural channel with 1/4″ plate angled from bottom of 10″ channel to bottom of floor plate

HEADBOARD
3/16" Hardox® HX450 steel continuously welded to the floor, welded loops on front to hold tools.  Headboard is 55” tall on XDX and 63” on MHX bodies.

BODY SIDES
3/16″ Hardox® HX450 steel continuously welded to floor

SIDE POSTS
None

BARN DOORS
3/16″ Hardox® HX450 skins, positive locking mechanism on top and bottom, 3 hinges per door

BODY HOIST
34 ton capacity minimum with dual 6″ hydraulic cylinders powered up and down for 22’ bodies.  For 24’ bodies cylinders on dump hoist are power up and gravity down.

BODY LIGHTS
Meets federal lighting standards, includes elevated brake lights and LED body lights for increase visibility

PAINT
High grade primer and enamel finish

WIRING
Wire loom or conduit (optional)

HDX HARDOX® Body roll up

Petersen Industries Self-Winding Load Cover

HDX HARDOX® Body strobe

Rear Strobe – Mounted on Underride

HDX HARDOX® Body flashers

Amber LED Flashers Mounted in Rear Corner Posts

HDX HARDOX® Body work lights

Underbody Work Lights

HDX HARDOX® Body toolbox

Tool Box – Mounted under Body

HDX HARDOX® Body single door

Single Door with Air Latches

  Get a Quote
close slider

Fields Marked with an * are required