Model TT2 Trash Dump Trailer

TT2 Dump Trailer Body

Our standard trailer is heavy duty! Trailer includes 3" pintle eye, jack stand, quick couplers, and 15,000 lb capacity draw bar. Designed for use with Petersen models RL-3 and RL-2.

 

  • Available with single or dual axle
  • Electric brakes are standard
  • Body lights are inset or flush mounted
  • Single sheet 3/16" floor
  • 10 gauge sides, headboard, and doors
  • Side stakes 3" x 4" formed channel
  • 4" cross sills on 12" centers

TL3 Brochure 

BODY FLOOR 10 gauge steel continuously welded to the floor. Top rail is 3" x 4" formed channel.
CROSS SILLS 10 gauge steel continuously welded to the floor.
HEADBOARD 3" x 4" x 10 gauge formed channel on 24" centers. 1/4" steel plate formed rear comer posts.
BODY SIDES Top and bottom positive locks. Three hinges per door with two 5/8" thick straps.
SIDE POSTS 10 gauge steel continuously welded to the floor. Top rail is 3" x 4" formed channel.
BARN DOORS 10 gauge steel continuously welded to the floor.
BODY HOIST 12 ton dual hydraulic cylinder hoist.
FRAME 2" x 8" x 1/4" steel tubing with 6 cross members. Long members are one welded piece from pintle eye to hinge.
SINGLE AXLE 15,000 lb. capacity with dual wheels and tires. Electric brakes are standard. (also available with tandem axle)
DRAW BAR Vertical load capacity of 15,000 Ibs. and 3" pintle eye.
BODY LIGHTS Meets federal lighting standards. Mud flaps installed behind rear wheels.
PAINT High grade primer and enamel finish.




All Petersen trailers include manual jack stand mounted on tongue of trailer with sufficient capacity for disconnecting loaded trailer. One control valve is included for operation of hoist. Additional control valve will be included if optional hydraulic jack stand is used. Quick couplers on hydraulic lines and electrical hookup, including lights and brakes.