You are here: Products » MODEL TBH

Model TBH Heavy Duty Body

Heavy Duty Truck Body

Petersen's model TBH trash dump body was designed for heavier operations like sidewalk removal, large stumps and C&D waste. Heavy duty style body is also mandatory for higher volume bodies.

 

  • Sizes range from 20-45 cubic yards
  • Three year structural warranty
  • Achieves a 45 degree dump angle without ground contact
  • To avoid rust, design incorporates no 90 degree angles on lower portion of body sides
  • All body lights are recessed or flush mounted
  • Body hinges are greaseless 3/16" fabricated plate, three on each side

TL3 Brochure 

Model Length
(ft.)		 Volume
(cu. Yd.)		 Side Ht.
(ft)		 Length Min. GVWR
1820TBH 18 20 4 168 C/A 33000
1824TBH 18 24 5 168 C/A 33000
1828TBH 18 28 6 168 C/A 33000
2026TBH 20 26 5 186 C/A 35000
2030TBH 20 30 6 186 C/A 37000
2234TBH 22 34 6 192 C/T 52000
2240TBH 22 40 7 192 C/T 56000
BODY FLOOR 1/4" single sheet steel plate. Includes 3/16" reinforcement plates continuously welded between floor and sides.
CROSS SILLS 4" structural channel on 12" centers.
LONG SILLS 8" structural channel.
HEADBOARD 3/16" steel continuously welded to the floor. Loops welded to front for holding tools.
BODY SIDES 3/16" steel continuously welded to the floor.
SIDE POSTS 3" x 5" x 10 gauge formed channel on 24" centers. 1/4" steel plate formed rear corner posts.
BARN DOORS Top and bottom positive locks. Three hinges per door with two 5/8" thick straps.
BODY HOIST
Venco 6620 dual cylinder hydraulic cylinder hoist. 22 ft. long bodies receive larger Parker S64 single telescopic hoist. Body achieves 45 degree dump angle without contacting the ground.
BODY LIGHTS Meets federal lighting standards. Elevated brake lights for increased visibility and safety.
PAINT High grade primer and enamel finish.










 

  • PI self-winding load covering device
  • Single rear strobe mounted on safety bumper
  • Brush guard for single rear strobe
  • Twin strobes mounted on rear corner posts
  • Continuous welds for side posts
  • Tool box inside body, locking door each side
  • Tool box, truck frame mounted under body
  • Parker S64 single telescopic hoist
  • Hand loading door
  • Body dump alarm
  • Steel mud flaps in front of rear wheels
  • Wire loom for body wiring
  • Steel conduit for exposed body wiring
  • LED lights