Dump Bodies for Sale - Standard & Heavy Duty Bodies

Model TBS/TBH - Standard & Heavy Duty Bodies

Dump Bodies for Sale – Model TBS/TBH

Both our TBS and TBH bodies are built to withstand heavy use, so you can haul brush, concrete, or even cars without a second thought. Unrivaled durability means fewer maintenance headaches, less downtime, and more work done.

Dump 40,000 pounds: A hoist that can dump 4x the legal payload

Bodies That Take a Beating: Heavy gauge steel, and a unique design that uses the floor to reinforce the sides

Minimize Human Error: Positive locking mechanism keeps the barn doors shut tight

Dump Bodies for Sale Brochure
Dump Body for Sale Specifications


Dump Bodies – Model TBS/TBH: Standard Features

Petersen’s model TBH trash dump body was designed for heavier operations like sidewalk removal, large stumps and C&D waste. Heavy duty style body is also mandatory for higher volume bodies.

  • Sizes range from 20-45 cubic yards
  • Three-year structural warranty
  • Achieves a 45-degree dump angle without ground contact
  • To avoid rust, design incorporates no 90-degree angles on lower portion of body sides
  • All body lights are recessed or flush mounted
  • Body hinges are greaseless 3/16″ fabricated plate, three on each side

Dump Bodies – Model TBS/TBH: Specifications

Dump Body for Sale Specifications


Model  |  Length (ft.)  |  Volume (cu. Yd.)  |  Side Ht. (ft)  |  Length Min. GVWR
1820TBH   18 ft.   20 cu.yd.   4 ft.   168 C/A   33000
1824TBH   18 ft.   24 cu.yd.   5 ft.   168 C/A   33000
1828TBH   18 ft.   28 cu.yd.   6 ft.   168 C/A   33000
2026TBH   20 ft.   26 cu.yd.   5 ft.   186 C/A   35000
2030TBH   20 ft.   30 cu.yd.   6 ft.   186 C/A   37000
2234TBH   22 ft.   34 cu.yd.   6 ft.   192 C/T   52000
2240TBH   22 ft.   40 cu.yd.   7 ft.   192 C/T   56000


1/4″ single sheet steel plate. Includes 3/16″ reinforcement plates continuously welded between floor and sides.
4″ structural channel on 12″ centers.
8″ structural channel.
3/16″ steel continuously welded to the floor. Loops welded to front for holding tools.
3/16″ steel continuously welded to the floor.
3″ x 5″ x 10 gauge formed channel on 24″ centers. 1/4″ steel plate formed rear corner posts.
Top and bottom positive locks. Three hinges per door with two 5/8″ thick straps.
Venco 6620 dual cylinder hydraulic cylinder hoist. 22 ft. long bodies receive 35 ton Scott LL3000 telescopic hoist. Body achieves 45-degree dump angle without contacting the ground.
Meets federal lighting standards. Elevated brake lights for increased visibility and safety.
High-grade primer and enamel finish.

Dump Bodies – Model TBS/TBH: Options

  • PI self-winding load covering device
  • Single rear strobe mounted on safety bumper
  • Brush guard for single rear strobe
  • Twin strobes mounted on rear corner posts
  • Continuous welds for side posts
  • Tool box inside body, locking door each side
  • Tool box, truck frame mounted under body
  • Parker S64 single telescopic hoist
  • Hand loading door
  • Body dump alarm
  • Steel mud flaps in front of rear wheels
  • Wire loom for body wiring
  • Steel conduit for exposed body wiring
  • LED lights